Browsing by Author "Bleahu, Andrei"

Now showing 1 - 13 of 13

4D imaging using accelerating airy beams and nonlinear reconstruction
(2023) Bleahu, Andrei; Gopinath, Shivasubramanian; Anand, Vijayakumar; Rosen, Joseph; Juodkazis, Saulius; Tamm, Aile; Kukli, Kaupo; Rajeswary, Aravind Simon John Francis; Katkus, Tomas; Pristy, Agnes; Ng, Soon Hock; Praveen, P. A.; Kahro, Tauno; Smith, Daniel; Arokiaraj, Francis Gracy; Kumar, Ravi
Deep Deconvolution of Object Information Modulated by a Refractive Lens Using Lucy-Richardson-Rosen Algorithm
(2022) Praveen, P.A.; Arockiaraj, Francis Gracy; Gopinath, Shivasubramanian; Smith, Daniel; Kahro, Tauno; Valdma, Sandhra-Mirella; Bleahu, Andrei; Ng, Soon Hock; Reddy, Andra Naresh Kumar; Katkus, Tomas; Rajeswary, Aravind Simon John Francis; Ganeev, Rashid A.; Pikker, Siim; Kukli, Kaupo; Tamm, Aile; Juodkazis, Saulius; Anand, Vijayakumar
A refractive lens is one of the simplest, most cost-effective and easily available imaging elements. Given a spatially incoherent illumination, a refractive lens can faithfully map every object point to an image point in the sensor plane, when the object and image distances satisfy the imaging conditions. However, static imaging is limited to the depth of focus, beyond which the point-to-point mapping can only be obtained by changing either the location of the lens, object or the imaging sensor. In this study, the depth of focus of a refractive lens in static mode has been expanded using a recently developed computational reconstruction method, Lucy-Richardson-Rosen algorithm (LRRA). The imaging process consists of three steps. In the first step, point spread functions (PSFs) were recorded along different depths and stored in the computer as PSF library. In the next step, the object intensity distribution was recorded. The LRRA was then applied to deconvolve the object information from the recorded intensity distributions during the final step. The results of LRRA were compared with two well-known reconstruction methods, namely the Lucy-Richardson algorithm and non-linear reconstruction.
Enhanced design of multiplexed coded masks for Fresnel incoherent correlation holography
(Scientific Reports, 2023) Gopinath, Shivasubramanian; Bleahu, Andrei; Kahro, Tauno; Rajeswary, Aravind Simon John Francis; Kumar, Ravi; Kukli, Kaupo; Tamm, Aile; Rosen, Joseph; Anand, Vijayakumar
Fresnel incoherent correlation holography (FINCH) is a well-established incoherent digital holography technique. In FINCH, light from an object point splits into two, differently modulated using two diffractive lenses with different focal distances and interfered to form a self-interference hologram. The hologram numerically back propagates to reconstruct the image of the object at different depths. FINCH, in the inline configuration, requires at least three camera shots with different phase shifts between the two interfering beams followed by superposition to obtain a complex hologram that can be used to reconstruct an object’s image without the twin image and bias terms. In general, FINCH is implemented using an active device, such as a spatial light modulator, to display the diffractive lenses. The first version of FINCH used a phase mask generated by random multiplexing of two diffractive lenses, which resulted in high reconstruction noise. Therefore, a polarization multiplexing method was later developed to suppress the reconstruction noise at the expense of some power loss. In this study, a novel computational algorithm based on the Gerchberg-Saxton algorithm (GSA) called transport of amplitude into phase (TAP-GSA) was developed for FINCH to design multiplexed phase masks with high light throughput and low reconstruction noise. The simulation and optical experiments demonstrate a power efficiency improvement of ~ 150 and ~ 200% in the new method in comparison to random multiplexing and polarization multiplexing, respectively. The SNR of the proposed method is better than that of random multiplexing in all tested cases but lower than that of the polarization multiplexing method.
Enhanced design of pure phase greyscale diffractive optical elements by phase-retrieval-assisted multiplexing of complex functions
(2023) Gopinath, Shivasubramanian; Bleahu, Andrei; Kahro, Tauno; Rajeswary, Aravind Simon John Francis; Kumar, Ravi; Kukli, Kaupo; Tamm, Aile; Rosen, Joseph; Anand, Vijayakumar
Enhanced design of pure phase greyscale diffractive optical elements by phase-retrieval-assisted multiplexing of complex functions
(Society of Photo-Optical Instrumentation Engineers (SPIE), 2023) Gopinath, Shivasubramanian; Bleahu, Andrei; Kahro, Tauno; Rajeswary, Aravind Simon John Francis; Kumar, Ravi
Fresnel incoherent correlation holography with Lucy-Richardson-Rosen algorithm and modified Gerchberg-Saxton algorithm
(2023) Anand, Vijayakumar; Juodkazis, Saulius; Rajeswary, Aravind Simon John Francis; Arockiaraj, Francis Gracy; Gopinath, Shivasubramanian; Bleahu, Andrei
Fresnel incoherent correlation holography with Lucy-Richardson-Rosen algorithm and modified Gerchberg-Saxton algorithm
(Society of Photo-Optical Instrumentation Engineers (SPIE), 2023) Bleahu, Andrei; Gopinath, Shivasubramanian; Arockiaraj, Francis Gracy; Rajeswary, Aravind Simon John Francis; Juodkazis, Saulius
Holographic solution to a fundamental problem in diffractive optics: resolution beyond diffraction and lithography limits
(2023) Bleahu, Andrei; Gopinath, Shivasubramanian; Xavier, Agnes Pristy Ignatius; Kahro, Tauno; Reddy, Andra Naresh Kumar; Arockiaraj, Francis Gracy; Smith, Daniel; Ng, Soon Hock; Katkus, Tomas; Rajeswary, Aravind Simon John Francis; Angamuthu, Praveen Periyasami; Pikker, Siim; Kukli, Kaupo; Tamm, Aile; Juodkazis, Saulius; Rosen, Joseph; Anand, Vijayakumar
Implementation of a Large-Area Diffractive Lens Using Multiple Sub-Aperture Diffractive Lenses and Computational Reconstruction
(2023) Gopinath, Shivasubramanian; Angamuthu, Praveen Periysamy; Kahro, Tauno; Bleahu, Andrei; Arockiaraj, Francis Gracy; Smith, Daniel; Hock Ng, Soon; Juodkazis, Saulius; Kukli, Kaupo; Tamm, Aile; Anand, Vijayakumar
Direct imaging systems that create an image of an object directly on the sensor in a single step are prone to many constraints, as a perfect image is required to be recorded within this step. In designing high resolution direct imaging systems with a diffractive lens, the outermost zone width either reaches the lithography limit or the diffraction limit itself, imposing challenges in fabrication. However, if the imaging mode is switched to an indirect one consisting of multiple steps to complete imaging, then different possibilities open. One such method is the widely used indirect imaging method with Golay configuration telescopes. In this study, a Golay-like configuration has been adapted to realize a large-area diffractive lens with three sub-aperture diffractive lenses. The sub-aperture diffractive lenses are not required to collect light and focus them to a single point as in a direct imaging system, but to focus independently on different points within the sensor area. This approach of a Large-Area Diffractive lens with Integrated Sub-Apertures (LADISA) relaxes the fabrication constraints and allows the sub-aperture diffractive elements to have a larger outermost zone width and a smaller area. The diffractive sub-apertures were manufactured using photolithography. The fabricated diffractive element was implemented in indirect imaging mode using non-linear reconstruction and the Lucy–Richardson–Rosen algorithm with synthesized point spread functions. The computational optical experiments revealed improved optical and computational imaging resolutions compared to previous studies.
Improved Classification of Blurred Images with Deep-Learning Networks Using Lucy-Richardson-Rosen Algorithm
(Licensee MDPI, 2023) Jayavel, Amudhavel; Gopinath, Shivasubramanian; Angamuthu, Praveen Periyasamy; Arockiaraj, Francis Gracy; Bleahu, Andrei; Xavier, Agnes Pristy Ignatius; Smith, Daniel; Han, Molong; Slobozhan, Ivan; Ng, Soon Hock; Katkus, Tomas; Rajeswary, Aravind Simon John Francis; Sharma, Rajesh; Juodkazis, Saulius; Anand, Vijayakumar
Pattern recognition techniques form the heart of most, if not all, incoherent linear shift-invariant systems. When an object is recorded using a camera, the object information is sampled by the point spread function (PSF) of the system, replacing every object point with the PSF in the sensor. The PSF is a sharp Kronecker Delta-like function when the numerical aperture (NA) is large with no aberrations. When the NA is small, and the system has aberrations, the PSF appears blurred. In the case of aberrations, if the PSF is known, then the blurred object image can be deblurred by scanning the PSF over the recorded object intensity pattern and looking for pattern matching conditions through a mathematical process called correlation. Deep learning-based image classification for computer vision applications gained attention in recent years. The classification probability is highly dependent on the quality of images as even a minor blur can significantly alter the image classification results. In this study, a recently developed deblurring method, the Lucy-Richardson-Rosen algorithm (LR2A), was implemented to computationally refocus images recorded in the presence of spatio-spectral aberrations. The performance of LR2A was compared against the parent techniques: Lucy-Richardson algorithm and non-linear reconstruction. LR2A exhibited a superior deblurring capability even in extreme cases of spatio-spectral aberrations. Experimental results of deblurring a picture recorded using high-resolution smartphone cameras are presented. LR2A was implemented to significantly improve the performances of the widely used deep convolutional neural networks for image classification.
Preface: International Conference on Holography Meets Advanced Manufacturing (HMAM2)
(2023) Anand, Vijayakumar; Jayavel, Amudhavel; Palm, Viktor; Gopinath, Shivasubramanian; Bleahu, Andrei; Rajeswary, Aravind Simon John Francis; Kukli, Kaupo; Balasubramani, Vinoth; Smith, Daniel; Ng, Soon Hock; Juodkazis, Saulius
The CIPHR group, Institute of Physics, University of Tartu, Estonia, and Optical Sciences Center, Swinburne University of Technology, Australia, jointly organized the interdisciplinary online conference “Holography Meets Advanced Manufacturing” during 20–22 February 2023.
Realizing large-area diffractive lens using multiple subaperture diffractive lenses and computational reconstruction
(2023) Gopinath, Shivasubramanian; Xavier, Agnes Pristy Ignatius; Angamuthu, Praveen Periyasamy; Kahro, Tauno; Tamm, Oskar; Bleahu, Andrei; Arockiaraj, Francis Gracy; Smith, Daniel; Ng, Soon Hock; Juodkazis, Saulius; Kukli, Kaupo; Tamm, Aile; Anand, Vijayakumar
Statement of Peer Review
(2023) Anand, Vijayakumar; Jayavel, Amudhavel; Palm, Viktor; Gopinath, Shivasubramanian; Bleahu, Andrei; Rajeswary, Aravind Simon John Francis; Kukli, Kaupo; Balasubramani, Vinoth; Kumar, Ravi; Smith, Daniel; Ng, Soon Hock; Juodkazis, Saulius